Skip to main content
LetCompliance
Running Your Let

Using your own contractors as a landlord: quotes, the checks that matter and the paper trail (UK 2026)

Sending repairs to your own trades cuts out a middle step and gets jobs done faster, if you check the right things first and keep the paperwork. How to get a fair quote, the two registers to check, what a good job brief says, and the invoices HMRC expects you to keep.

8 min read

Sample account, the Tenant inbox: 1 repair open, with Tell the tenant and Log a repair, then 1 open repair, 0 past the deadline, 1 with no priority set and 1 resolved this month, over the Messages, Repairs, Pet requests, Notices and Meter readings tabs
Sample account, the landlord’s repairs list: Kitchen tap dripping, resolved, reported 16 Oct 2026 and closed 16 Oct 2026
Sample account with made-up details, 16 and 18 Oct 2026

See how LetCompliance tracks repairs

A landlord with two or three trades they trust gets repairs done faster and cheaper than one who rings round every time something breaks. The plumber who knows the house fixes the leak in one visit; the electrician who did the last inspection knows where the consumer unit is. The cost is a little organisation: the right checks before anyone starts, a clear brief, and the invoices kept where you and HMRC can find them.

This guide covers getting quotes, the two registers that matter by law, what a good job brief says, and the paper trail, including one invoice that covers several homes. The law and guidance were read on legislation.gov.uk and GOV.UK, and the Gas Safe Register on its own site, on 16 November 2026. It applies across the UK unless it says otherwise.

Getting a quote you can compare

For anything beyond a small repair, get more than one quote, and make them comparable:

  • Send each trade the same brief. The same description, photographs and access details, so the prices are for the same job
  • Ask for a written, itemised quote. Labour, materials, VAT if they charge it, and what is not included
  • Ask how long it will take and when they can start. For a let, the start date can matter more than a small difference in price: every day a tenant is without heating is a day closer to a complaint
  • Check what happens if they find more. A roofer who finds rotten battens needs to call you before doing extra work, not add it to the bill

A quote is not a contract until you accept it. Accept in writing, by email or message, with the price, so there is no argument later about what was agreed.

The two checks the law cares about

Most trades come with no legal check. Two do, and both are about safety.

Gas. In Great Britain, no one may carry out work on a gas fitting unless they are competent, and a self-employed engineer or a business must be a member of the class of persons approved by HSE (Gas Safety (Installation and Use) Regulations 1998, regulation 3). In practice that is the Gas Safe Register, which says on its own site that "All gas businesses and their engineers must be on the Gas Safe Register to carry out gas work legally". Check the engineer on the register before they start, and look at their ID card: it lists the types of gas work they are registered to do. A boiler engineer is not necessarily registered for a gas fire.

Electrics. The electrical inspection in a rented home in England must be done by a qualified person, which GOV.UK's guidance describes as "a person competent to undertake the inspection and testing". GOV.UK points landlords to the Registered Competent Person Electrical register and Electrical Safety First's search to find one. For electrical work itself, a member of a competent person scheme can self-certify certain work instead of getting building regulations approval, which saves you arranging a building control visit.

For everything else, the checks are common sense: a business address, references or reviews you can verify, and a clear answer on who to call if the work goes wrong.

The job brief

A good brief gets the job done in one visit. It should say:

  1. 1The address and the access. Who lets them in, the tenant's agreed time, any keys, parking
  2. 2What is wrong, in plain words. "Water dripping from the kitchen ceiling below the bathroom since Tuesday", not "leak"
  3. 3Photographs. From the tenant's report or your own visit
  4. 4What you want. A repair, a quote first, or a repair up to a set amount without calling you
  5. 5How you want the invoice. To you, by email, with the property address on it, the work done and the date

Tell the tenant who is coming and when, in writing. If you need to be there yourself to look at the condition of the home, the landlord's right of entry needs 24 hours' written notice at a reasonable time; how often to inspect covers the rule.

The paper trail HMRC expects

Repairs are an allowable expense against rent, so the invoice is a tax record. GOV.UK's guidance on records says that for rental income you should keep "rent books, receipts, invoices and bank statements" and the allowable expenses you pay to run the property. For a landlord the law sets the period: someone letting property is treated as carrying on a trade, so the records are kept until at least the fifth anniversary of the 31 January filing deadline for the tax year (Taxes Management Act 1970, section 12B(2)(a) and (6)), and longer if HMRC has opened an enquiry. Keep them longer still if the work may count for Capital Gains Tax when you sell.

What makes an invoice useful years later:

  • The property address. An invoice that says only "plumbing works" is hard to tie to a let
  • What was done. Especially where the line between a repair and an improvement matters; repair or improvement explains why
  • The date and the amount paid. Matched to the bank payment

One invoice, several homes. A roofer who fixes the gutters along a terrace you own sends one bill of £1,450. Each home's share is that home's expense: £600 for number 12, £450 for number 14 and £400 for number 16, split by the work on each, adding back to £1,450. Ask the roofer to show the split on the invoice; it matters if the homes are owned differently, or one is sold later.

When the job is done

  • Check the work. Or ask the tenant to confirm it is fixed, in writing
  • Pay against the invoice, and keep the bank record with it
  • Note any guarantee. A new boiler or a roof repair often comes with one; write down the end date
  • Rate the contractor for yourself. On time, tidy, fair price, would use again

Over a year, those notes become the list of trades you call first, which is the point of having your own. The repairs workflow covers the tenant's side of each job.

Your own trades, organised

Your contractors, their jobs and the invoices, together. In LetCompliance, on the trial and paid plans, the contractors directory keeps each trade with the properties they cover, the Gas Safe number or competent person scheme you record for them, and your own rating. LetCompliance does not check those numbers against the registers, so check them yourself first. From a repair you send the job, approve their quote and keep the work history with its cost. On every plan, the repair triage suggests the priority, the trade and a brief for the contractor, and the maintenance log keeps the cost, the photographs and any warranty against the property, with one invoice's cost split across several properties to the penny. Single, for one property, is £7.99 a month.

Frequently asked questions

How do I check a gas engineer is qualified?

Check them on the Gas Safe Register and look at their Gas Safe ID card, which lists the types of gas work they are registered to do. By law, a self-employed engineer or a business doing gas work must be a member of the class of persons approved by HSE (Gas Safety Regulations 1998, reg 3), which is the Gas Safe Register.

Who can do an EICR on a rented property?

A qualified person, which GOV.UK describes as a person competent to undertake the inspection and testing. GOV.UK points landlords to the Registered Competent Person Electrical register and Electrical Safety First to find one.

How long should a landlord keep contractor invoices?

Until at least the fifth anniversary of the 31 January filing deadline for the tax year: someone letting property is treated as carrying on a trade for record keeping (Taxes Management Act 1970, section 12B). Keep them longer if the work may count for Capital Gains Tax when you sell.

How do I split one contractor invoice across several properties?

Give each property its share of the work, so each share is that property’s expense and the shares add back to the invoice total. Ask the contractor to show the split on the invoice.

Should a landlord get more than one quote for repairs?

For anything beyond a small repair, yes. Send each trade the same brief and photographs, ask for written itemised quotes and start dates, and accept the one you choose in writing.

Sources and scope

Every source above is a government or regulator’s page the guide cites, linked where it is used. The invoice figures are an example. The guide also links other publishers in its text, where it uses them. This is guidance, not individual legal advice.

Ask an AI about this guide

Opens your assistant with this page as its source.

Share this guide

𝕏

You have read the guide. Now run the let.

Advertise and reference tenants, sign the agreement, collect the rent, log repairs and keep the tax figures ready all year. Certificates, deposits and deadlines are tracked alongside, so nothing expires unnoticed.

Plans from £7.99 a month, with a 3-day trial and no card. Making Tax Digital, recognised by HMRC, comes with every paid plan, not the trial.